Remote Commands
R&S
®
FPL1000
947
User Manual 1178.3370.02 ─ 09
Manual operation:
See
HCOPy:TREPort:ITEM:HEADer:STATe
<State>
This command includes or excludes the complete set of measurement information from
the test report.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
HCOP:TREP:ITEM:HEAD:STAT ON
Includes the measurement information in the test report.
Manual operation:
See
HCOPy:TREPort:ITEM:LIST?
[<ChannelType>]
This command queries the selected information to be included in the test report for a
specific channel type.
Parameters:
<ChannelType>
Selects the channel type that you want to query the test report
configuration for.
When you omit the parameter, the command returns the configu-
ration of the currently selected channel.
Example:
HCOP:TREP:ITEM:LIST? SAN
Queries the items that are included in the test reports of the
Spectrum application.
Usage:
Query only
Table 11-9: Available <ChannelTypes>
<ChannelType>
SAN
Spectrum
HCOPy:TREPort:ITEM:LOGO
<FileName>
This command selects a graphic (for example a company logo) that is shown at the top
of each page in the test report.
Use
HCOPy:TREPort:ITEM:LOGO:CONTrol
on page 948 to select the conditions
under which the picture is shown.
Parameters:
<FileName>
String containing the location and name of the picture.
You can use the following file types:
bmp
,
jpg
,
png
,
gif
,
emf
or
wmf
format.
Example:
HCOP:TREP:ITEM:LOGO 'C:\aPicture.jpg'
Includes a picture at the top of each page of the report.
Managing Settings and Results
