Getting Started
R&S
®
FPL1000
73
User Manual 1178.3370.02 ─ 09
5.4.3
Entering Data
Data can be entered in dialog boxes using one of the following methods:
●
Using the touchscreen, via the online keyboard
●
Using other elements provided by the front panel, e.g. the keypad, rotary knob, or
navigation keys
The rotary knob acts like the [ENTER] key when it is pressed.
●
Using a connected external keyboard
Transparent dialog boxes
You can change the transparency of the dialog boxes to see the results in the windows
behind the dialog box. Thus, you can see the effects that the changes you make to the
settings have on the results immediately.
To change the transparency, select the transparency icon at the top of the dialog box.
A slider is displayed. To hide the slider, select the transparency icon again.
(The title bar of the dialog box is always slightly transparent and is not affected by the
slider.)
Particularities in Windows dialog boxes
In some cases, e.g. if you want to install a printer, original Windows dialog boxes are
used. In these dialog boxes, the rotary knob and function keys do not work. Use the
touchscreen instead.
Entering Numeric Parameters
If a field requires numeric input, the keypad provides only numbers.
1. Enter the parameter value using the keypad, or change the currently used parame-
ter value by using the rotary knob (small steps) or the [UP] or [DOWN] keys (large
steps).
2. After entering the numeric value via keypad, press the corresponding unit key.
The unit is added to the entry.
3. If the parameter does not require a unit, confirm the entered value by pressing the
[ENTER] key or any of the unit keys.
The editing line is highlighted to confirm the entry.
Entering Alphanumeric Parameters
If a field requires alphanumeric input, you can use the on-screen keyboard to enter
numbers and (special) characters (see
Chapter 5.4.2.4, "On-screen Keyboard"
Operating the Instrument
