manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, User Manual

Share
Download
Ronde & Schwarz 1304.0004.03 User Manual Download Page 1035

Maintenance, Storage and Disposal

R&S

®

FPL1000

1035

User Manual 1178.3370.02 ─ 09

14.3

 

Handling Batteries

Safe handling of batteries is described in 

"Handling batteries safely"

 

on page 10. Main-

tenance information is provided here.

Keep the batteries clean and dry. If the terminals become soiled, clean them with a dry,
clean cloth.

Charging batteries

Charge the battery before using it for the first time. Following a long storage period, it
can be necessary to charge and discharge the battery several times to reach full
capacity.

For details on charging batteries, see 

"Charging batteries"

 

on page 22.

Storing batteries

Ideally, use the original packing. Otherwise, observe the following rules:

●

Do not expose to direct sunlight.

●

Prevent short-circuiting of the batteries, which can happen if batteries touch each
other or come into contact with metallic objects in the storage container.

14.4

 

Storage

Protect the product against dust. Ensure that the environmental conditions, e.g. tem-
perature range and climatic load, meet the values specified in the data sheet.

14.5

 

Disposal

Rohde

 

&

 

Schwarz is committed to making careful, ecologically sound use of natural

resources and minimizing the environmental footprint of our products. Help us by dis-
posing of waste in a way that causes minimum environmental impact.

Electrical and electronic equipment

A product that is labeled as follows cannot be disposed of in normal household waste
after it has come to the end of its service life. Even disposal via the municipal collection
points for waste electrical and electronic equipment is not permitted.

Figure 14-1: Labeling in line with EN 50419

Rohde

 

&

 

Schwarz has developed a disposal concept for the ecofriendly disposal or

recycling of waste material. As a manufacturer, Rohde

 

&

 

Schwarz completely fulfills its

Disposal

Summary of Contents for 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands