Ronde & Schwarz 1304.0004.03, User Manual

Page: 70 / 1076

Getting Started
R&S
®
FPL1000
70 User Manual 1178.3370.02 ─ 09
The undo function is useful, for example, if you are performing a zero span measure-
ment with several markers and a limit line defined and accidentally select a different
measurement. In this case, many settings would be lost. However, if you press [UNDO]
immediately afterwards, the previous status is retrieved, i.e. the zero span measure-
ment and all settings.
Note: The [UNDO] function is not available after a [PRESET] or "Recall" operation.
When these functions are used, the history of previous actions is deleted.
Redo
Repeats previously reverted operation
Zoom mode
Displays a dotted rectangle in the diagram that can be expanded to define the zoom
area.
See Chapter 7.12, "Zoomed Displays" , on page 437.
Multiple zoom mode
Multiple zoom areas can be defined for the same diagram.
See Chapter 7.12, "Zoomed Displays" , on page 437.
Zoom off
Displays the diagram in its original size.
See Chapter 7.12, "Zoomed Displays" , on page 437.
SmartGrid
Activates "SmartGrid" mode to configure the screen layout.
See Chapter 6.6, "Configuring Result Displays" , on page 88.
Sequencer
Opens the "Sequencer" menu to perform consecutive measurements.
See Chapter 6.4, "Running a Sequence of Measurements" , on page 83
Gen On/Off
Enables/disables the internal generator.
See Chapter 7.3.3, "Internal (Tracking) Generator" , on page 283.
Gen Config
Opens the dialog box to configure the internal generator.
See "Tracking Generator Settings" on page 292.
Help (+ Select)
Allows you to select an object for which context-specific help is displayed
See Chapter 5.4.5, "Getting Help" , on page 77
Help
Displays context-sensitive help topic for the most recently selected element
See Chapter 5.4.5, "Getting Help" , on page 77
Operating the Instrument