Ronde & Schwarz 1304.0004.03, User Manual

Page: 185 / 1076

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
185 User Manual 1178.3370.02 ─ 09
File names must be compatible with the Windows conventions for file names. In partic-
ular, they must not contain special characters such as ":", "*", "?".
For details on the filename and location, see Chapter 8.2.2.2, "Storage Location and
Filename" , on page 461.
Load Standard
Loads the selected measurement settings file.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet[:STANdard]
on page 660
File Explorer
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
Save Standard
Saves the current measurement settings for a specific standard as a file with the
defined name.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet:STORe
on page 660
Delete Standard
Deletes the selected standard. Standards predefined by Rohde & Schwarz can also be
deleted. A confirmation query is displayed to avoid unintentional deletion of the stan-
dard.
Note: Restoring predefined standard files. The standards predefined by Rohde &
Schwarz available at the time of delivery can be restored using the "Restore Standard
Files" function (see
"Restore Standard Files" on page 185).
Restore Standard Files
Restores the standards predefined by Rohde & Schwarz available at the time of deliv-
ery.
The XML files from the
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_backup
folder are copied to the
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\sem_std
folder.
Note that this function will overwrite customized standards that have the same name
as predefined standards.
Remote command:
[SENSe:]ESPectrum<sb>:PRESet:RESTore
on page 660
List Evaluation (Results Configuration)
Access : "Overview" > "Select Measurement" > "Spectrum Emission Mask" > "List
Evaluation"
In the "List Evaluation" dialog box, you configure the contents and display of the SEM
results.
Measurements and Results