manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, User Manual

Share
Download
Ronde & Schwarz 1304.0004.03 User Manual Download Page 515

General Instrument Setup

R&S

®

FPL1000

515

User Manual 1178.3370.02 ─ 09

Component

hardware messages: name of the affected module

software messages: name of the affected software

Date/Time

date and time of the occurrence of the message

Remote command:

SYSTem:ERRor:LIST?

 

on page 974

9.4.4

 

Firmware Updates

Access

: [Setup] > "System Configuration" > "Firmware Update"

During instrument start, the installed hardware is checked against the current firmware
version to ensure the hardware is supported. If not, an error message is displayed
("Wrong Firmware Version") and you are asked to update the firmware. Until the firm-
ware version is updated, self-alignment fails. To see which components are not suppor-
ted, see the 

System Messages

.

The firmware on your R&S

 

FPL1000 may also need to be updated in order to enable

additional new features or if reasons for improvement come up. Ask your sales repre-
sentative or check the Rohde&Schwarz website for availability of firmware updates. A
firmware update package includes at least a setup file and release notes.

Before updating the firmware on your instrument, read the release notes delivered with
the firmware version.

Enter the name or browse for the firmware installation file and press the "Install" but-
ton.

System Configuration Settings

Summary of Contents for 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands