Remote Commands
R&S
®
FPL1000
613
User Manual 1178.3370.02 ─ 09
●
Asynchronous commands
A command which does not automatically finish executing before the next com-
mand starts executing (overlapping command) is indicated as an
Asynchronous
command
.
●
Reset values (*RST)
Default parameter values that are used directly after resetting the instrument (
*RST
command) are indicated as
*RST
values, if available.
●
Default unit
The default unit is used for numeric values if no other unit is provided with the
parameter.
●
Manual operation
If the result of a remote command can also be achieved in manual operation, a link
to the description is inserted.
11.2
Common Suffixes
In the Spectrum application, the following common suffixes are used in remote com-
mands:
Table 11-1: Common suffixes used in remote commands in the Spectrum application
Suffix
Value range
Description
<m>
1 to 16
Marker
<n>
1 to 16
Window (
in the currently selected channel setup
)
<t>
1 to 6
Trace
<li>
1 to 8
Limit line
11.3
Common Commands
Common commands are described in the IEEE 488.2 (IEC 625-2) standard. These
commands have the same effect and are employed in the same way on different devi-
ces. The headers of these commands consist of "*" followed by three letters. Many
common commands are related to the Status Reporting System.
Available common commands:
Common Commands
