manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, User Manual

Share
Download
Ronde & Schwarz 1304.0004.03 User Manual Download Page 517

General Instrument Setup

R&S

®

FPL1000

517

User Manual 1178.3370.02 ─ 09

Out-of-range value behavior

....................................................................................... 517

Out-of-range value behavior

By default, if you enter a value that is outside the valid range in an input field for a set-
ting, a warning is displayed and the value is not accepted. Alternatively, entries below
the minimum value can automatically be set to the minimum possible entry, and entries
above the maximum value set to the maximum possible entry. This behavior avoids
errors and facilitates setting correct values.

9.4.6

 

Additional Interfaces

The following settings are only available if the "Additional interfaces" option R&S

 

FPL1-

B5 is installed.

Wait for Trigger Polarity

The optional AUX PORT connector of the R&S

 

FPL1000 can provide a signal that indi-

cates the instrument is ready to receive a trigger signal.

(For details on the connector see the R&S

 

FPL1000 Getting Started manual).

The signal polarity that indicates the trigger availability is configurable.

"Low"

A low signal (=

 

0

 

V) indicates the instrument is ready to receive a trig-

ger.

"High"

A high signal (=

 

5

 

V) indicates the instrument is ready to receive a

trigger.

Remote command: 

OUTPut:UPORt:WTRigger:POLarity LOW | HIGH

 (see the R&S

 

FPL1000 user

manual)

9.5

 

Service Functions

Access

: [Setup] > "Service"

Service Functions

Summary of Contents for 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands