manualshive.com logo in svg

Ronde & Schwarz 1304.0004.03, User Manual

Share
Download
Ronde & Schwarz 1304.0004.03 User Manual Download Page 68

Getting Started

R&S

®

FPL1000

68

User Manual 1178.3370.02 ─ 09

Table 5-8: Status bar information - color coding

Color

Type

Description

Red

Error

An error occurred at the start or during a measurement, e.g. due to missing
data or wrong settings, so that the measurement cannot be started or com-
pleted correctly.

Orange

Warning

An irregular situation occurred during measurement, e.g. the settings no lon-
ger match the displayed results, or the connection to an external device was
interrupted temporarily.

Gray

Information

Information on the status of individual processing steps.

No color

No errors

No message displayed - normal operation.

Green

Measurement
successful

Some applications visualize that the measurement was successful by show-
ing a message.

If any error information is available for a channel setup, an exclamation mark is dis-
played next to the channel setup name ( ). This is particularly useful when the Multi-
View tab is displayed, as the status bar in the MultiView tab always displays the infor-
mation for the currently selected channel setup only.
Furthermore, a status bit is set in the 

STATus:QUEStionable:EXTended:INFO

 reg-

ister for the application concerned (see 

"STATus:QUEStionable:EXTended:INFO Reg-

ister"

 

on page 568). Messages of a specific type can be queried using the

SYST:ERR:EXT?

 command, see 

SYSTem:ERRor:EXTended?

 

on page 973.

5.4.2

 

Accessing the Functionality

All tasks necessary to operate the instrument can be performed using this user inter-
face. Apart from instrument specific keys, all other keys that correspond to an external
keyboard (e.g. arrow keys, ENTER key) operate as specified by Microsoft.

For most tasks, there are at least 2 alternative methods to perform them:

●

Using the touchscreen

●

Using other elements provided by the front panel, e.g. the keypad, rotary knob, or
arrow and position keys.

The measurement and instrument functions and settings can be accessed by selecting
one of the following elements:

●

System and function keys on the front panel of the instrument

●

Softkeys on the touchscreen

●

Context menus for specific elements on the touchscreen

●

Icons on the tool bar in the touchscreen

●

Displayed setting on the touchscreen

Operating the Instrument

Summary of Contents for 1304.0004.03





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands