![Ronde & Schwarz 1304.0004.03 User Manual Download Page 776](http://html1.mh-extra.com/html/ronde-and-schwarz/1304-0004-03/1304-0004-03_user-manual_1484985776.webp)
Remote Commands
R&S
®
FPL1000
776
User Manual 1178.3370.02 ─ 09
11.8.3
Configuring the Vertical Axis (Amplitude, Scaling)
The following commands are required to configure the amplitude and vertical axis set-
tings in a remote environment.
................................................................................................ 776
...................................................................................778
.....................................................................................779
11.8.3.1
Amplitude Settings
The tasks for manual configuration are described in
Chapter 7.5.2, "Amplitude Set-
Useful commands for amplitude configuration described elsewhere:
●
Remote commands exclusive to amplitude configuration:
CALCulate<n>:MARKer<m>:FUNCtion:REFerence
........................................................... 776
........................................................................................... 776
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
........................................................777
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet
........................................... 777
CALCulate<n>:MARKer<m>:FUNCtion:REFerence
This command matches the reference level to the power level of a marker.
If you use the command in combination with a delta marker, that delta marker is turned
into a normal marker.
Suffix:
<n>
.
<m>
Example:
CALC:MARK2:FUNC:REF
Sets the reference level to the level of marker 2.
Manual operation:
See
"Reference Level = Marker Level"
CALCulate<n>:UNIT:POWer
<Unit>
UNIT<n>:POWer
<Unit>
This command selects the unit of the y-axis.
The unit applies to all power-based measurement windows with absolute values.
Suffix:
<n>
.
irrelevant
Setting Basic Spectrum RF Measurement Parameters