Rohde & Schwarz FPL1000 Series, User Manual

Page: 82 / 899

Applications, Measurement Channels, and Result Displays
R&S
®
FPL1000
82 User Manual 1178.3370.02 ─ 03
Spectrum ......................................................................................................................82
I/Q Analyzer ................................................................................................................. 82
Analog Demod ............................................................................................................. 82
Noise Figure .................................................................................................................82
Spectrum
In the Spectrum application the provided functions correspond to those of a conven-
tional spectrum analyzer. The analyzer measures the frequency spectrum of the RF
input signal over the selected frequency range with the selected resolution and sweep
time. Alternatively, it displays the waveform of the video signal for a fixed frequency.
This is the default application of the spectrum analyzer.
Remote command:
INST:SEL SAN
, see
INSTrument[:SELect]
on page 529
I/Q Analyzer
The I/Q Analyzer application provides measurement and display functions for I/Q data.
Remote command:
INST:SEL IQ
, see
INSTrument[:SELect]
on page 529
Analog Demod
The Analog Demodulation application provides measurement functions for demodulat-
ing AM, FM, or PM signals.
This application requires the optional firmware R&S FPL1-K7 to be installed.
For details see the Analog Demodulation Mode User Manual.
Remote command:
INST:SEL ADEM
, see
INSTrument[:SELect]
on page 529
Noise Figure
The Noise Figure application provides noise figure measurements.
This application requires the optional firmware R&S FPL1-K30 to be installed.
For details see the Noise Figure Measurements User Manual.
Remote command:
INST:SEL NOISE
, see
INSTrument[:SELect]
on page 529
5.2 R&S MultiView
Each application is displayed in a separate tab. If more than one application is active,
an additional tab ( "MultiView" ) provides an overview of all currently active channel
setups at a glance. In the "MultiView" tab, each individual window contains its own
channel setup bar. Select the channel setup bar to switch to an application quickly.
R&S MultiView