Rohde & Schwarz FPL1000 Series, User Manual

Page: 702 / 899

Remote Commands
R&S
®
FPL1000
702 User Manual 1178.3370.02 ─ 03
CALCulate<n>:MATH:STATe <State>
This command turns the trace mathematics on and off.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:MATH:STAT ON
Turns on trace mathematics.
Manual operation: See " Trace Math Function " on page 487
See " Trace Math Off " on page 488
8.8.7.4 Retrieving Trace Results
This chapter describes how to retrieve data from standard traces.
For spectrograms see also Chapter 8.8.8.6, "Marker Search (Spectrograms)" ,
on page 728.
For details on the format of the retrieved trace data see also Chapter 8.8.7.5, "Formats
for Returned Values: ASCII Format and Binary Format" , on page 705.
Commands required to export traces (and other result data) are described in Chap-
ter 8.9.5, "Storing Measurement Results" , on page 810.
FORMat[:DATA]
.............................................................................................................702
TRACe<n>[:DATA]
.........................................................................................................703
TRACe<n>[:DATA]:MEMory?
..........................................................................................704
TRACe<n>[:DATA]:X?
....................................................................................................705
FORMat[:DATA] <Format>
This command selects the data format that is used for transmission of trace data from
the R&S
FPL1000 to the controlling computer.
Note that the command has no effect for data that you send to the R&S FPL1000. The
R&S FPL1000 automatically recognizes the data it receives, regardless of the format.
For details on data formats see Chapter 8.8.7.5, "Formats for Returned Values: ASCII
Format and Binary Format" , on page 705.
Setting Basic Spectrum RF Measurement Parameters