Rohde & Schwarz FPL1000 Series, User Manual

Page: 599 / 899

Remote Commands
R&S
®
FPL1000
599 User Manual 1178.3370.02 ─ 03
Parameters:
<State> ON | OFF | 1 | 0
ON | 1
Includes all detected peaks (up to a maximum defined by
CALCulate<n>:PEAKsearch:SUBRanges
on page 600).
OFF | 0
Includes only one peak per range.
*RST:
0
Example: CALC:ESP:PSE:DET ON
CALC:PSE:SUBR 10
Includes up to 10 peaks per range in the list.
Usage: Event
Manual operation: See " Details " on page 336
CALCulate<n>:PSEarch:MARGin <Threshold>
CALCulate<n>:PEAKsearch:MARGin <Threshold>
This command defines the threshold of the list evaluation.
Suffix:
<n>
.
Window
Parameters:
<Margin> Range: -200 to 200
*RST: 200
Default unit: dB
Example: CALC:PSE:MARG 100
Sets the threshold to 100 dB.
CALCulate<n>:PSEarch:PSHow <State>
CALCulate<n>:PEAKsearch:PSHow <State>
This command turns the peak labels in the diagram on and off.
Peak labels are blue squares.
Suffix:
<n>
.
Window
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:PSE:PSH ON
Marks all peaks with blue squares.
Configuring and Performing Measurements