Rohde & Schwarz FPL1000 Series, User Manual

Page: 721 / 899

Remote Commands
R&S
®
FPL1000
721 User Manual 1178.3370.02 ─ 03
Suffix:
<n>
.
Window
<m> Marker
Usage: Event
Manual operation: See " Peak Search " on page 436
CALCulate<n>:MARKer<m>:MAXimum:RIGHt
This command moves a marker to the next lower peak.
The search includes only measurement values to the right of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Usage: Event
Manual operation: See " Search Next Peak " on page 436
CALCulate<n>:MARKer<m>:MINimum:AUTO <State>
This command turns an automatic marker peak search for a trace minimum on and off.
The R&S
FPL1000 performs the peak search after each sweep.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: CALC:MARK:MIN:AUTO ON
Activates the automatic minimum value search function for
marker 1 at the end of each particular sweep.
Manual operation: See " Auto Max Peak Search / Auto Min Peak Search "
on page 431
CALCulate<n>:MARKer<m>:MINimum:LEFT
This command moves a marker to the next minimum value.
The search includes only measurement values to the right of the current marker posi-
tion.
Setting Basic Spectrum RF Measurement Parameters