manualshive.com logo in svg

Rohde & Schwarz FPL1000 Series, User Manual

Share
Download
Rohde & Schwarz FPL1000 Series User Manual Download Page 135

Common Instrument Functions

R&S

®

FPL1000

135

User Manual 1178.3370.02 ─ 03

6.3.2.4

How to Work with the Soft Front Panels

Basic operation with the soft front panels is identical to normal operation, except for the
following aspects:

To activate a key, select the key on the touchscreen.

To simulate the use of the rotary knob, use the additional keys displayed between the
keypad and the arrow keys:

Icon

Function

Turn left

Enter

Turn right

Mini front panel

The mini front panel provides only the keys on the touchscreen, to operate the
R&S

 

FPL1000 via an external monitor or remote desktop.

By default, the "Auto close" option is activated and the mini front panel window closes
automatically after you select a key. This is useful if you only require the mini front
panel display occasionally to press a single function key.

If you want the window to remain open, deactivate the "Auto close" option. You can
close the window manually by selecting "Close planel" or the key combination ALT + M
(be aware of the keyboard language defined in the operating system!).

To display the soft front panel or mini front panel

1. Press the SETUP key and select the "Display" softkey.

2. Select the "Displayed Items" tab.

3. Select "Front Panel" : "On" or "Mini Front Panel" : "On" .

To activate or deactivate the front panel temporarily, press the F6 key on the external
keyboard (if available) or on the remote computer.
If the softkey menu is visible, you can display the "Mini Front Panel" quickly and easily
by double-clicking the title of the softkey menu.
To close the mini front panel or the softkey menu, click the   "Close" icon at the top of
the menu or panel.

6.3.3 Language Settings

Access

: SETUP > "Language"

The graphical user interface of the R&S

 

FPL1000 can be displayed in various lan-

guages so you can operate the instrument in your most familiar language.

 

 

General Instrument Setup

Summary of Contents for FPL1000 Series




































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands