Remote Control
R&S
®
NRT2
94
User Manual 1178.5550.02 ─ 04
Example:
Definition:
OUTPut:AUDiobits <audiobits>
Command:
OUTP:AUD 24
Special characters | and { }
|
A vertical bar in parameter definitions indicates alternative possibilities in the sense of
"or". The effect of the command differs, depending on which parameter is used.
Example
:
Definition:
INITiate:CONTinuous ON | OFF
Command
INITiate:CONTinuous ON
starts the measurements
Command
INITiate:CONTinuous OFF
stops the measurements
{ }
Parameters in braces may be included in the command once, several times or not at all.
11.2
Status Reporting System
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. You can query both with the commands of the
STATus
subsystem.
11.2.1
Hierarchy of the Status Registers
shows the hierarchical structure of information in the status registers.
Status Reporting System
