Rohde & Schwarz 1430.0105K02, User Manual

Page: 125 / 206

Remote Control
R&S
®
NRT2
125 User Manual 1178.5550.02 ─ 04
Manual operation: See "Resolution" on page 48
CALCulate<Measurement>[:CHANnel<Channel>]:AVERage:COUNt:AUTO[:
STATe] <state>
Enables or disables the mode for determining the Average Count automatically from
the level of the input signal.
Suffix:
<Measurement>
.
1...100
<Channel> 1...2
Parameters:
<state> *RST: ON
Manual operation: See "Averaging Mode" on page 57
CALCulate<Measurement>[:CHANnel<Channel>]:AVERage:COUNt[:VALue]
<value>
Sets the filter length i.e. the number of readings to be averaged for one measured
value. The higher the count the lower the noise and the longer it takes to obtain a mea-
sured value.
Suffix:
<Measurement>
.
1...100
<Channel> 1...2
Parameters:
<value> Range: 1 to 256
*RST: 4
Manual operation: See "Averaging Count" on page 57
CALCulate<Measurement>[:CHANnel<Channel>]:CORRection:OFFSet:RPLane
<plane>
Selects the source (SOURce) or the load (LOAD) port as the reference plane for mea-
surements.
Suffix:
<Measurement>
.
1...100
<Channel> 1...2
Parameters:
<plane> SOURce | LOAD
*RST:
SOURce
Manual operation: See "Offset Reference Plane" on page 54
CALCulate