Rohde & Schwarz 1430.0105K02, User Manual

Page: 24 / 206

Getting Started
R&S
®
NRT2
24 User Manual 1178.5550.02 ─ 04
[Freq]
Sets the carrier frequency of the applied signal. This value is used for frequency-
response correction of the measurement result.
Remote command:
[SENSe<Sensor>:]FREQuency[:CW]
on page 152
Favorites
Reserved for future use.
[Preset]
Opens the "Save / Recall / Preset" dialog.
See Chapter 7, "Saving and Recalling Settings" , on page 58.
If you press [Preset] again, the preset function starts.
See "Preset" on page 59.
If you press the [Preset] key during booting, the R&S NRT2 starts with the factory
default state.
[Zero]
Pressing [Zero] opens the "Zeroing Sensors" dialog.
If you press [Zero] again, zeroing starts.
Also displays status information:
●
Zeroing status
●
Sensor status
[System]
Opens the "System Overview" dialog.
See Chapter 9, "System Settings" , on page 62.
Cursor keys
See (4) in Figure 3-2 .
The cursor keys are context-sensitive. The control in focus is indicated by a focus
frame. Use the cursor keys as follows:
●
Selecting an element in the navigation pane.
●
Selecting the active pane.
●
Selecting an element from a list.
●
Moving the cursor in text boxes.
●
Changing the value of an entry in a text box.
3.2.1.4 USB Host Interface
See (5) in Figure 3-2 .
USB 2.0 (universal serial bus) interface of the type A (host USB). Used to connect:
●
R&S NRT
‑
Zxx power sensor using the R&S NRT
‑
Z5 USB interface adapter
●
External devices like a keyboard, mouse, or memory stick
Instrument Tour