Rohde & Schwarz 1430.0105K02, User Manual

Page: 107 / 206

Remote Control
R&S
®
NRT2
107 User Manual 1178.5550.02 ─ 04
*PSC <psc>
Writes/reads the power on status clear flag (PSC).
Parameters:
<psc> Power on status clear flag.
*RCL <number>
ReCaLl
Calls the device state which has been stored with the
*SAV
command under the speci-
fied number.
Setting parameters:
<number> Range: 0 to 9
*RST: 0
Usage: Setting only
Manual operation: See "Recall" on page 59
*RMC <Label>
Remove macro content.
Setting parameters:
<Label>
Usage: Setting only
*RST
ReSeT
Sets the sensor to the default state, i.e. the default settings for all parameters are loa-
ded. The command corresponds to the command
SYSTem:PRESet
.
Usage: Event
Manual operation: See "Preset" on page 59
*SAV <number>
SAVe
Stores the current device state under the specified number. The storage numbers 0 to
9 are available.
Setting parameters:
<number> Range: 0 to 9
*RST: 0
Usage: Setting only
Common Commands