Rohde & Schwarz 1430.0105K02, User Manual

Page: 23 / 206

Getting Started
R&S
®
NRT2
23 User Manual 1178.5550.02 ─ 04
The R&S NRT2 displays results in panes. Depending on the measurement mode, val-
ues are displayed digitally or graphically.
False triggers can occur
If an object (e.g. a human finger) that is charged with static electricity is brought near
the touch panel, false triggers can occur.
This behavior is caused by the principle of operation of a PCAP (projected capacitive)
touch panel.
Further information:
●
"Using the touchscreen" on page 28
3.2.1.3 Keys
See (3) in Figure 3-2 .
[Esc] / Local
If you press shortly:
●
Changes to the next-higher hierarchy level.
●
Escapes from the entry mode in text boxes and lists.
●
Closes dialogs without losing any entries that have been made.
●
Switches from remote control mode (all controls disabled) to manual operation.
If you press and hold:
●
Goes to the main measurement dialog.
See
Chapter 4.1.1, "Main Measurement Dialog" , on page 28.
Further information:
●
"Going back to a higher hierarchy level" on page 28
●
Chapter 4.3.2, "Returning to Manual Operation (LOCAL)" , on page 36
Screenshot
Creates a screenshot of the current display.
See Chapter 4.1.5, "Creating and Saving Screenshots" , on page 33.
Remote command:
SYSTem:HCOPy
on page 176
[1Trig] / Delete
●
Controls the measurements depending on the trigger mode:
–
For all trigger modes except "Single", starts and stops the measurement.
– For the "Single" trigger mode, enables and triggers the measurement.
Changes of the trigger state apply to all measurements.
See also
"Trigger Mode" on page 47.
●
Deletes numbers or text in a field so that you can enter a new value.
Enter
●
Confirms entries in text fields, dialogs and selections in lists.
●
Shows a frame around the control in focus. You can change the focus using the
Cursor keys .
Instrument Tour