Rohde & Schwarz 1430.0105K02, User Manual

Page: 47 / 206

Measurement and Display Configuration
R&S
®
NRT2
47 User Manual 1178.5550.02 ─ 04
5.5.3 Trigger Settings
Access:"Measurement Overview" > "Measurement" > "Measurement Main Configura-
tion".
See Chapter 5.3, "Measurement Main Configuration Dialog" , on page 44.
Trigger Mode ................................................................................................................. 47
Trigger Source ...............................................................................................................47
Trigger Mode
Controls the trigger execution depending on the settings under "Trigger Source"
on page 47.
"Normal" Continuous triggering with regular trigger events.
"Freerun" Enables a continuous measurement. The power sensor executes one
measurement cycle after the other.
"Single"
Disables continuous triggering so that only one trigger event at a time
is executed. To enable triggering again, press [1Trig].
Remote command:
TRIGger<Measurement>:MODE
Trigger Source
Sets the source for the trigger event. See Chapter 5.5.2, "Trigger Sources" ,
on page 46.
Remote command:
TRIGger<Measurement>:SOURce
5.6 Measurement Representation
Access:"Measurement Overview" > "Representation"
Measurement Representation