Rohde & Schwarz 1430.0105K02, User Manual

Page: 69 / 206

System Settings
R&S
®
NRT2
69 User Manual 1178.5550.02 ─ 04
Remote command:
SYSTem:OPT:MODE
SYSTem:OPT:AUTO
Custom IDN String ← Emulations tab
Available if Customization of *IDN? is set to "User".
Sets the customized instrument identification string so that you can identify each R&S
NRT2 individually.
Remote command:
SYSTem:IDN:ANSWer
Custom OPT String ← Emulations tab
Available if Customization of *OPT? is set to "User".
Sets the customized option identification string.
Remote command:
SYSTem:OPT:ANSWer
9.1.3 Input/Output Settings (I/O)
Access: [System] > "Connections" > "I/O"
The "I/O" dialog is divided into the following tabs:
I/O 1, I/O 2 tabs .............................................................................................................69
└ Mode ...............................................................................................................70
└ 0 V Equivalent .................................................................................................70
└ 2.5 V Equivalent ..............................................................................................71
└ Fail Voltage ..................................................................................................... 71
I/O 1, I/O 2 tabs
Configures the two multifunctional BNC connectors at the rear of the R&S NRT2, see
Chapter 3.2.2.1, "Trig In / Out 2 and Out 1 / Trig Out Connectors" , on page 25.
●
Use the "I/O 1" tab for Out 1 / Trig Out connector.
●
Use the "I/O 2" tab for Trig In / Out 2 connector.
Connections