System Settings
R&S
®
NRT2
78
User Manual 1178.5550.02 ─ 04
Security Password to Unlock Settings ← General tab
Enter the password that is required to enable the settings protected by a security pass-
word. When you leave the "Security" dialog, the settings are disabled automatically.
For preconfigured value and further information, see
USB Storage ← General tab
Enables or disables the file transfer via USB storage.
Volatile Mode ← General tab
If enabled, the R&S NRT2 does not save changed settings in the non-volatile memory.
After a reboot, the R&S NRT2 has the same configuration as at the time when you
enabled the volatile mode.
Use the volatile mode if you want to reboot with a defined configuration for a measure-
ment setup, regardless off any settings made manually or by remote control.
Enabling the volatile mode requires the security password. If you change into the vola-
tile mode or back, a reboot is required.
User Interface ← General tab
Fixed value.
"Enabled"
Enables manual operation. The screen and all manual controls are
working. Remote operation is also enabled.
LAN Settings tab
Configures the LAN interface in general or all LAN services individually.
Instrument Info
