![Rohde & Schwarz 1430.0105K02 User Manual Download Page 159](http://html1.mh-extra.com/html/rohde-and-schwarz/1430-0105k02/1430-0105k02_user-manual_1477792159.webp)
Remote Control
R&S
®
NRT2
159
User Manual 1178.5550.02 ─ 04
Parameters:
<upper>
Range:
-1999.0 to 1999.0
*RST:
1.0
Example:
The following commands set the upper scale limit to a reverse
power of 100 W:
SENS1:POW:REFL:RANG:AUTO OFF
SENS1:POW:REFL:RANG 100
SENS1:FUNC "POW:REV"
UNIT1:POW W
[SENSe<Sensor>:]POWer:PEP:HOLD
<time>
Sets the hold time of the peak hold circuit of the sensor.
Parameters:
<time>
Range:
1.0e-3 to 1.0e-1
*RST:
6.0e-2
Default unit: s
[SENSe<Sensor>:]POWer[:POWer]:RANGe:AUTO
<state>
This command switches the automatic adaptation of the bargraph scaling to the mea-
sured power value on or off.
Parameters:
<state>
ON
If auto-ranging has been selected, the scale limits of the bar-
graphs are automatically adapted to the current measured value.
OFF
If auto-ranging is switched off, the limits and hence the scale
remain fixed.
*RST:
1
Example:
SENS1:POW:RANG:AUTO OFF
Manual operation:
See
[SENSe<Sensor>:]POWer[:POWer]:RANGe:LIMit:DETect
<value>
This command defines the conditions for a logic high level (> 2.7 V) being output at the
AUX TTL connector if this connector has been defined as a monitoring output for the
power indication (eg with the command
SENSe<n>:POWer:RANGe:LIMit ON
).
Parameters:
<value>
INBound | OUTBound | HIGH
INBound
A high level is output if the measured power is within the range
specified by the scale limits of the lefthand bargraph.
SENSe