Rohde & Schwarz 1430.0105K02, User Manual

Page: 25 / 206

Getting Started
R&S
®
NRT2
25 User Manual 1178.5550.02 ─ 04
Further information:
●
Chapter 3.1.8.2, "USB 2.0 Host Interfaces" , on page 20
●
Chapter 3.1.9, "Connecting USB and External Devices" , on page 20
3.2.1.5 On/Standby Key
See (6) in Figure 3-2 .
The on/standby key switches between standby and ready state, if the power switch is
set to [I].
Further information:
●
Chapter 3.2.2.5, "AC Supply and Power Switch" , on page 26
●
Chapter 3.1.10, "Switching On or Off" , on page 21
3.2.2 Rear Panel Tour
1 2 3 4
5 6 7
Figure 3-3: Rear panel of the R&S NRT2
1 = Trig In / Out 2 and Out 1 / Trig Out connectors, see Chapter 3.2.2.1, "Trig In / Out 2 and Out 1 / Trig Out
Connectors" , on page 25.
2 = Ethernet interface, see Chapter 3.2.2.2, "Ethernet Interface" , on page 26.
3 = USB device interface, see Chapter 3.2.2.3, "USB Device Interface" , on page 26.
4 = USB host interface, see Chapter 3.2.2.4, "USB Host Interface" , on page 26.
5 = AC supply and power switch, see Chapter 3.2.2.5, "AC Supply and Power Switch" , on page 26.
6 = IEC 625/IEEE 488 interface, see Chapter 3.2.2.6, "IEC 625/IEEE 488 Interface" , on page 26.
7 = Name plate, see Chapter 3.2.2.7, "Name Plate" , on page 27
3.2.2.1 Trig In / Out 2 and Out 1 / Trig Out Connectors
See (1) in Figure 3-3 .
Instrument Tour