
System Settings
R&S
®
NRT2
66
User Manual 1178.5550.02 ─ 04
IPv4 Address ← IPv4 tab
Available if "Static" is set under
.
Sets the IP address of the R&S NRT2.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress][:ADDRess]
SYSTem:COMMunicate:INET[:SELF]:ADDRess
Subnet Mask ← IPv4 tab
Available if "Static" is set under
.
Sets the subnet mask of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK
SYSTem:COMMunicate:INET[:SELF]:SUBNetmask:ADDRess
Default Gateway ← IPv4 tab
Available if "Static" is set under
.
Sets the IP address of the default gateway.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway
SYSTem:COMMunicate:INET[:SELF]:GATeway:ADDRess
DNS Server ← IPv4 tab
Available if "Static" is set under
.
Sets the DNS server address of your local subnet.
Remote command:
SYSTem:COMMunicate:NETWork[:IPADdress]:DNS
SYSTem:COMMunicate:INET[:SELF]:DNS:ADDRess
9.1.2
Remote Settings
Access: [System]
> "Connections"
> "Remote"
Contains the settings for remote control.
The "Remote" dialog is divided into the following tabs:
Interface - VISA Resource table
..................................................................... 67
................................................................................................. 68
...................................................................................68
................................................................................. 68
.......................................................................................... 69
.........................................................................................69
Connections