Rohde & Schwarz 1430.0105K02, User Manual

Page: 35 / 206

Operating Concepts
R&S
®
NRT2
35 User Manual 1178.5550.02 ─ 04
2. Enter as web address: http://<hostname> or http://<IP address> . For example,
http://nrx-104711 .
See also "Overview tab" on page 64.
3. Enter the password.
The preconfigured password is instrument .
Shortcuts for the front panel keys
During remote operation, you can operate the keys on the front panel using shortcuts:
Front panel key Remote operation replacement
[1 Trig] Backspace
[Esc] ESC
Favorites
Ctrl + C
[Freq] Ctrl + F
Screenshot
Ctrl + Y
[Preset] Ctrl + P
[System] Ctrl + E
[Zero] Ctrl + N
4.3 Remote Control
The R&S NRT2 is equipped with various interfaces for connecting it to a controller for
remote control:
●
IEC/IEEE bus interface (standard equipment) in line with the standards IEC
60625.1 (IEEE 488.1) and IEC 60625.2 (IEEE 488.2)
●
Gigabit Ethernet interface
●
USB 2.0 interface for remote control and firmware update
Connectors are installed at the rear of the R&S NRT2. See Chapter 3.2, "Instrument
Tour" , on page 22.
The interfaces support the SCPI (standard commands for programmable instruments)
standard, version 1999.0 of May 1999. The SCPI standard is based on the IEEE 488.2
standard. It defines a standardized command language for controlling measuring and
test instruments with functions beyond the scope of the IEEE 488.2 standard.
For a detailed description of the remote commands, see Chapter 11, "Remote Control" ,
on page 93.
Remote Control