Measurement and Display Configuration
R&S
®
NRT2
49
User Manual 1178.5550.02 ─ 04
"Scalar Digital" Numeric format
"Scalar Analog"
Numeric format with bar chart
Remote command:
Max Hold Function
For all measurement functions, the R&S NRT2 stores the maximum and minimum val-
ues and the calculated differences between these values.
The selected setting applies to both power and reflection indication. You can change at
any time.
"Max"
Maximum value
"Min"
Minimum value
"Max
−
Min"
Difference between maximum and minimum value
Remote command:
CALCulate<Measurement>:HOLD:FUNCtion
Max Hold
If enabled, displays the highest value measured for each point (pixel) of the selected
display type.
Remote command:
CALCulate<Measurement>:HOLD[:STATe]
Limit Monitor
You can set an upper and a lower limit for the forward and reflection measurement.
Forward Lower Limit State, Reflection Lower Limit State ← Limit Monitor
Enables or disables the monitoring function for the lower limit.
Remote command:
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer:STATe
Forward Lower Limit, Reflection Lower Limit ← Limit Monitor
Defines a lower limit.
Remote command:
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer[:DATA]:
CCDF
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer[:DATA][:
POWer]
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer[:DATA]:
RATio:RCOefficient
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer[:DATA]:
RATio:RFRatio
CALCulate<Measurement>:LIMit<DirectionalChannel>:LOWer[:DATA]:
RATio:RLOSs
Measurement Representation
