Raymarine c125 Installation And Operation Instructions Manual Download Page 460

Page: 460 / 464

Software version

Applicable product
manual

Multifunction displays
compatibility

Changes

• Corrected the ability to select Tide and/or

Current Station using the Find Nearest feature.

• Added NMEA 0183 & SeaTalkng data monitors

to the diagnostics features.

• Increased touch area for Alarm pop-ups and

Back buttons.

V2.10

81337–1

c95 / c97 / c125 / c127
/ e7 / e7D / e95 / e97 /
e125 / e127

• Cartography redraw performance has been

improved when sharing cartography via the
SeaTalkhs/RayNet network.

• Added support to display fuel flow rate.

• Addition of NMEA 0183 and SeaTalk

data

buffer diagnostics.

• Improvements to databar customization.

• Ability to manually change the aspect ratio of

the Video application.

V1.11

81332–1

e7 / e7D

• Initial software release.

460

a Series / c Series / e Series

Summary of Contents for c125

















































































































































































































































































































































































































































































Search results

Summary of Contents for c125

Reviews:

Related manuals for c125

Brands by name

Popular brands

Raymarine c125, Installation And Operation Instructions Manual

Search results

Summary of Contents for c125

Reviews:

Related manuals for c125

Brands by name

Popular brands