Raymarine c125, Installation And Operation Instructions Manual

Page: 315 / 464

2. Once the Radar has powered up, select Tx to
start the Radar transmitting.
Putting the Radar into Standby
The Radar can be placed into Standby mode, which
allows the Radar to remain powered up but not
transmitting.
With the Radar transmitting, from the Radar
application:
1. Select
Menu .
2. Select Radar: so that Standby is selected.
Powering down the Radar scanner
When the Radar is powered up it can be powered
down using the Radar application menu.
With the Radar powered up, from the Radar
application
1. Select
Menu .
2. Select Power down radar .
Using the power button to switch operating
modes
The radar operating modes can also be set using the
multifunction displays shortcut page.
1. Press and release the
Power button.
If you have 2 radar scanners connected; options
for each radar scanner will be shown.
The shortcuts page is displayed:
2. Select Power up radar(s) to turn on connected
radars, or Power down Radar to turn off the
selected radar.
Selecting Power up radar(s) will power up all
radars connected to the network.
3. Select Transmit to start the radar transmitting, or
Standby to stop the radar transmitting.
Radar application
315