Raymarine c125, Installation And Operation Instructions Manual

Page: 345 / 464

Showing or hiding video input feeds during
camera cycling
By default your multifunction display’s video input(s)
are shown during cycling, even if no feed is
connected. You can choose to Include or Exclude
video input(s) from Camera cycling. The Input(s)
included or excluded will apply to both Single View
and Quad View.
From the Camera application:
1. Select
Menu .
2. Select Camera View .
3. Select Camera Cycling .
4. Select the Include <Camera Name>: option for
the video input you want to Show or Hide.
Selecting
Include <Camera Name>: option will
switch between showing or hiding the video input
during camera cycling.
Note: In the steps above <Camera Name>
represents the default feed name provided by the
connected device or the custom name which can
be assigned to the feed.
Turning off camera cycling
You can turn off Camera cycling using the methods
detailed below.
From the camera application, with camera cycling
turned on:
1. Select
Menu > Camera View > Camera Cycling
> Camera Cycling: so that Off is highlighted, or
2. Change the camera / video feed manually.
22.5 Naming camera / video feeds
To help distinguish between camera feeds each feed
can be named.
From the Camera application:
1. Select the feed you want to name so that it is
displayed on the screen.
2. Select Menu .
3. Select Adjust .
4. Select Edit Name .
The onscreen keyboard is displayed.
5. Enter the name you want the feed to be called.
6. Select
SAVE to save the new name for the feed.
The name of the feed is displayed in the camera
application’s status bar.
Camera application
345