Raymarine c125 Installation And Operation Instructions Manual Download Page 459

Page: 459 / 464

Software version

Applicable product
manual

Multifunction displays
compatibility

Changes

• Ability to automatically cycle through available

video / camera feeds in the Camera application.

• Support for up to 5 engines in the Data

application.

• Improved engine data selection in the Data

application.

• Support for detailed engine warning alarms.

• Addition of on-screen range controls to the

Weather application

• Ability to view images saved to MicroSD card

from the homescreen My Data menu.

• Addition of Demo Video mode for retail.

• Ability to record live bus messages (NMEA

0183 and SeaTalk

to MicroSD card.

V4.32

81337–4

c95 / c97 / c125 / c127
/ e7 / e7D / e95 / e97 /
e125 / e127

• Addition of on-screen range controls to the

Chart & Radar applications.

• Addition of on-screen Gain, Rain & Sea

controls to Radar application.

• Addition of on-screen Gain & TVG controls to

Sonar application.

• Addition of slider bar control adjustment.

• Addition of new numeric adjustment controls.

• Improved Power Key shortcuts to Brightness

and Capture Screen image options

V3.15

81337–3

c95 / c97 / c125 / c127
/ e7 / e7D / e95 / e97 /
e125 / e127

• Added support for Raymarine CP450C CHIRP

Sonar Module.

• Added support for AIS feature support

for STEDS EAIS integration & display of SAR
aircraft & SART devices.

• Added limited support for Sirius Marine

Weather Module.

• Added Standby / PowerSave Mode.

• Added support for RayRemote and RayControl

Applications.

• Enhanced home screen customize option

permitting 9 and 12 inch MFDs to view up to 4
applications on a single page.

• Default Fuel data page added.

• Added Arabic language support.

• Inclusion of Remote Upgrade Utility to permit

the upload of software to peripheral Raymarine
products using SeaTalk

/ SeaTalk

• Display of Aids To Navigation (AToNs)

AIS targets when data received on either
SeaTalkng or NMEA 0183.

• Added 1kW transducer support added to MFDs

featuring internal ClearPulse Digital Sounder
circuitry (i.e. c97/c127/e7D/e97/e127 MFDs)
transducer output limited to 600W.

Software releases

459

Summary of Contents for c125

















































































































































































































































































































































































































































































Search results

Summary of Contents for c125

Reviews:

Related manuals for c125

Brands by name

Popular brands

Raymarine c125, Installation And Operation Instructions Manual

Search results

Summary of Contents for c125

Reviews:

Related manuals for c125

Brands by name

Popular brands