Polaris 3900 Sport/P39, Owner'S Manual

Page: 597 / 1258

Registration Reference Manual
MRE Re-boxing – ER
Directions to Access the ER-I Screen
1. Enter a key of ER with a qualifier of I .
2. Press Enter .
ER]MRE Re-boxing Qualifier[I ]
This screen allows you to associate many patient MREs with an MRE Box Number.
These MREs may already be known to the system (whereupon the data within the
System for each MRE will be updated to reflect the change of Box Number) or
this may be the first time that these MREs have been recorded within the
system.
Box Number [TESLX0000001 ]
Have these MREs already been recorded within the system (Y/N) [Y]
--------------------------------------------------------------------------------
NHS Number [ ]
Figure 1: ER Screen, Qualifier ‘I’
Understanding the ER-I Screen
Box Number
Enter a valid MRE box number.
Have these MREs already been recorded within the system (Y/N)
Enter N if these records are being boxed on this NHAIS system for the first time. This
will cause new MRE box number records to be created for each NHS number entered
below.
Enter Y if you are moving records that are already recorded as being in MRE boxes on
this NHAIS system. This will cause an existing MRE box number recorded against
the patient to be replaced with the new box number. If the patient has more than one
MRE box number recorded a pop-up box will be displayed to allow selection of the
record that is being re-boxed. To exit the box without making a selection, press the
space bar.
NHS Number
Enter a valid NHS number. This number may not be known on the NHAIS system,
but if it is the patient must have an current MR status of
RFH .
NOTE

The first two fields of the screen will always display the last values that
you entered. Once you have finished processing a box you may wish to
remove these values by blanking out the fields and updating the screen.
Version: 2.83
Section 8 8-3