manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 313 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 313

311

SP600 Spectrophotometer  01/2008

Delete User-Methods (Polynomial or Concentration)

In principle a valid user-method can be overwritten.
An existing user-method (Polynomial or Concentration) can be totally deleted as well and is 
removed out of the method selection list:

Press [MODE] [6] [6] keys.

Confirm with 

[ ]

 key.

The display shows:

Enter the number of the User-Method you want to delete 
(in the range from 800 to 824 or 850 to 859),  

 

e.g.: 800

Confirm with 

[ ]

 key.

There is displayed the query:

 

•  Press [1] key to delete the selected User-Method.

•  Press [0] key to keep the valid User-Method.

The instrument goes back to mode menu automatically.

 <User m. clear>
 choose no.: _______
 (800-824), (850-859)

 M800
 delete?
 YES: 1,  NO:  0

1

0

Mode

6

6

8 0 0

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments