ORBECO SP600, Instruction Manual, Page: 276 / 334

274 SP600 Spectrophotometer 01/2008
2.3.7 Changing chemical species
For some methods there is a possibility to change the chemical species of the test result.
If the test result is displayed press arrow key [ ] or [ ].
Example:
320 Phosphate LR T -----[ ]----> 320 Phosphate LR T <---- [ ] ----- 320 Phosphate LR T
0.05-4 mg/l PO4
0.02-1.3 mg/l P 0.04-3 mg/l P2O5
<---- [ ] ----- ------ [ ] ---->
1.00 mg/l PO4 0.33 mg/l P 0.75 mg/l P2O5
If the special species of a test result is changed the displayed range is adjusted automatically.
For an already stored result it is not possible to change the chemical species. The last displayed
chemical species is kept by the instrument and will be displayed if this method is used the
next time. If there is the possibility to change the chemical species for a method it is described
in the manual. The arrows with the possible chemical species are printed below the notes
of the method:
PO
4
P
P
2
O
5
2.3.8 Storing results
Press STORE key during the test result is displayed.
The display shows:
• We advise you to enter a numeric code (up to 6 places).
(A Code-No. can contain references to the operator or
the sample-taking place.)
After entering confirm with
[ ]
key.
• If a code number is not necessary confirm by pressing
[ ] directly. (The assignment for the Code-No. is then 0
automatically.)
The entire data set is stored with date, time, Code-No.,
method and test result.
The display shows:
The test result is then shown again.
Stored!
Code-No.:
_ _ _ _ _ _
Store
1 0 0 0 0 6