manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 307 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 307

305

SP600 Spectrophotometer  01/2008

User-method list, switch all methods on

This mode function activates all methods. After switching on the instrument a scroll list of 
all available methods is automatically shown in the display.

Press [MODE] [6] [1] keys.

Confirm with 

[ ]

 key.

The display shows:

 

•  Press [1] key to display all methods in the method

 

 

selection list.

•  Press [0] key to keep the valid method selection list.

The instrument goes back to mode menu automatically.

User-method list, switch all methods off

The program structure requires that the method list must have at least one active (switched 
on) method. For this reason the instrument activates one method automatically.

Press [MODE] [6] [2] keys.

Confirm with 

[ ]

 key.

The display shows:

•  Press [1] key to display only one method in the method

 

 

selection list.

•  Press [0] key to keep the valid method selection list.

The instrument goes back to mode menu automatically.

 <Mlist all on>
 switch on all
 methods
 YES: 1, NO: 0

 <Mlist all off>
 switch off all
 methods
 YES: 1, NO: 0

1

0

Mode

6

1

1

0

Mode

6

2

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments