manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 195 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 195

193

SP600 Spectrophotometer  01/2008

1.1 Methods 

14. 

Add 0.2 ml Nitrate-111.

15. Close the vial tightly with the cap and invert several 

times to mix the contents.

16. Place the vial in the sample chamber making sure that 

the marks     are aligned.

17. Press 

TEST

 key.

 

Wait for a 

reaction period of 15 minutes

.

 

After the reaction period is finished the measurement 
starts automatically.

 

The result is shown in the display in mg/l total Nitrogen.

Notes:

1. This test determines the inorganic compounds  Ammonium, Nitrate and Nitrite, as well  
  as organic compounds like amino acid, urea, complexing agents etc.
2. Nitrogen compounds which are hardly to oxidise, as may be found in industrial sewage,  
  are not digested or only partially.
3.   N
    NH

4

 

 NH

3

 Zero accepted
 prepare Test
 press TEST

 Countdown 
      15:00

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments