manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 277 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 277

275

SP600 Spectrophotometer  01/2008

Note:

The display shows the number of free data sets.

If there are less than 30 data sets free the display shows:

Clear the memory as soon as possible (see “Deleting stored 
results”). If memory capacity is used up it would be impos-
sible to save additional test results.

2.3.9 Printing results

If a printer is installed and switched on, it is possible to print out the test results (without 
saving it before). 

Press 

F3

 key. 

The entire data set is printed with date, time, Code-No.,  
method and test result. Printing example:

100 Chlorine T 

 

0.02-6 mg/l Cl

2

 

 

Profi-Mode: no 

 

2006-07-01   14:53:09 

 

Test No.: 1 

 

Code-Nr.: 007 

 

4.80 mg/l Cl

2 

 

The test No. is an internal number that is set automatically 
if a test result is stored. It appears only at the print out.

 Storage: only 29
 free records left

 Storage: 900
 free records left

F3

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments