manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 3 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 3

1

SP600 Spectrophotometer  01/2008

Safety precautions

CAUTION

Reagents are formulated exclusively for chemical analysis and must not be used for 

any other purpose. Reagents must not get into the hands of children. Some of the 

reagents contain substances which are not entirely harmless environmentally. Be 

aware of the ingredients and take proper care when disposing of the test solution.

CAUTION

 Please read this instruction manual before unpacking, setting up or using the 

photometer. Please read the method description completely before performing 

 the test. Be aware of the risks of using the required reagents by reading the MSDS 

(Material Safety Data Sheets). Failure could result in serious injury to the operator or 

damage to the instrument. 

MSDS: 

www.orbeco.com

SP600 Spectrophotometer_Revision 1  01/2008

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments