manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 282 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 282

280

SP600 Spectrophotometer  01/2008

Countdown (Ensuring reaction periods)

Some methods require a reaction period. This reaction period is incorporated in the method 
as standard by the countdown function.
It is possible to switch the countdown off for all methods:

Press [MODE] [1] [3] keys.

Confirm with 

[ ]

 key.

The display shows: 

 

 

• Press [0] key to switch the countdown off. 

 

 

• Press [1] key to switch the countdown on.

Confirm with 

[ ]

 key.

Notes:

1. It is possible to finish the working countdown by pressing the 

[ ]

 key  

  (application e.g. serial analysis). 
  The “user-countdown” is also available if the countdown is switched off.
2. If the countdown function is switched off, the operator is responsible for ensuring the  
  necessary reaction period by himself. 

Non-compliance with reaction periods lead to  

  incorrect test results.

 <Countdown>
 ON: 1 

OFF: 0

Mode

1

3

0

1

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments