manualshive.com logo in svg

ORBECO SP600, Instruction Manual, Page: 271 / 334

Share
Download
ORBECO SP600 Instruction Manual Download Page 271

269

SP600 Spectrophotometer  01/2008

2.2.3 User-countdown

With this function the operator is able to define his own countdown.

Press [“clock”] key.

The display shows time and date:

Press [“clock”] key.

The display shows:

Either press [ ] key to accept the last used user-count-
down.

or

 
press any number key to start entering a new value

The entering comprises two digits each. 
Enter minutes and seconds,
e.g.: 2 minutes, 0 seconds = [0][2][0][0].
Confirm with 

[ ]

 key. 

 

 
The display shows:

Start count down with 

[ ]

 key.

After countdown has finished the photometer reverts to the 
previous display automatically.

  19.30.20   2006-06-15

  Countdown   
  mm : ss
  99 : 99

 Countdown
       02:00
  Start:  

0 2 0 0

Summary of Contents for SP600















































































































































































































































































































































Reviews:

No comments