346
Ch
apt
e
r
5
Mou
nti
ng
F3SG-SR/PG
User’s Manual
Wiring and Installation
6.
Securely tighten screws to fix the Top/Bottom Bracket to the mounting position of the wall surface. (Fig.7)
Screws to mount the brackets to the wall are not included.
7.
Power the emitter and receiver on to perform beam alignment.
Move the emitter and receiver from side to side (Fig. 8) to check the state of the beams
For more information on the beam alignment procedure, refer to
- The angle adjustment range is ±22.5° when using the Top/Bottom Brackets only.
- The angle adjustment range is ±15° when using the Top/Bottom Brackets and Adjustable Side-Mount Bracket(s)
together.
- For the way to distinguish the emitter from the receiver or distinguish the emitter/receiver from the passive mirror, refer
5-3-4-2. Mounting with Adjustable Side-Mount Brackets (Intermediate Brackets) (F39-LSGA)
Fig. 7
M8
M8
M5/M6
M5/M6
Using one M8 screw
<Backside mounting>
<Side mounting>
<Backside mounting>
<Side mounting>
Using two M5 or M6 screws
Fig. 8
Summary of Contents for F3SG-PG Series
