Omron F3SG-PG Series, User Manual, Page: 278 / 473

248
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
4-3-4-3. Muting/Override
First, carry out 4-3-1. Preparing to Change Settings .
Next, click the icon below on the Top page.
The setting screen below is displayed.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C

F3SG-SRB

F3SG-PGA-L

No.
Function
name
Description Initial value
Configurable value or numerical
range
1 Muting Select Enable or Disable for the Muting function.
When you want to restore the readout settings
received from the F3SG-SR/PG, execute [Recover
status at readout]. Enable Disable/Enable
2 Muting mode Select a desired muting mode. Standard
Muting Standard muting (Installation
example 1)/Standard muting
(Installation example 2)/Exit-only
muting/Position detection muting
3 View
installation Shows installation conditions. - -
4 Setting by Select manual setting using SD Manger 3 or setting
by teach-in. Manual Manual/Teach-in
5 Zone setting Select a desired zone number. To configure zone
settings, specify desired bottom and top beam
numbers from the drop-down list, or directly on the
chart. When you check the [Designate from chart]
box, you can specify a zone range by dragging red
lines shown on the chart. In both cases above,
execute [Confirm zone] to confirm the settings. Bottom/Top
beam:
All beams Desired beam
(in 1-beam increments)
6 Confirm zone Confirm the settings of the zone. - -