Omron F3SG-PG Series, User Manual, Page: 54 / 473

24
Chapter
1
Ra
tings
a
nd
Spec
if
icat
ions
F3SG-SR/PG
User’s Manual
Overview and Specifications
1-5-3. F3SG-SR IP69K Model
Model F3SG-4SRB

-14-K F3SG-4SRB

-25-K
Performance Detection capability Opaque objects
Beam gap 10 mm 20 mm
Number of beams 31 to 179 16 to 92
Lens size 4.4

3.4 mm (W

H) 6.7

4.5 mm (W

H)
Protective height 320 to 1,800 mm 320 to 1,840 mm
Operating
range Long 0.3 to 8.0 m 0.3 to 16.0 m
Short 0.3 to 2.4 m 0.3 to 5.6 m
* When operating at an ambient temperature of -10 to -30°C, use the F3SG-SR with the operating range
of 0.3 to 4.0 m in Long Mode and 0.3 to 1.2 m in Short Mode.
Response time Normal
mode
ON to
OFF Optical synchronization: 8 to 18 ms
Wired synchronization: 10 to 21 ms Optical synchronization: 8 to 13 ms
Wired synchronization: 10 to 17 ms
OFF
to ON Optical synchronization: 40 to 90 ms
Wired synchronization: 50 to 105 ms Optical synchronization: 40 to 65 ms
Wired synchronization: 50 to 85 ms
×2 Slow
mode * ON to
OFF Optical synchronization: 16 to 36 ms
Wired synchronization: 20 to 42 ms Optical synchronization: 16 to 26 ms
Wired synchronization: 20 to 34 ms
OFF
to ON Optical synchronization: 80 to 180 ms
Wired synchronization: 100 to 210 ms Optical synchronization: 80 to 130 ms
Wired synchronization: 100 to 170 ms
×4 Slow
mode * ON to
OFF Optical synchronization: 32 to 72 ms
Wired synchronization: 40 to 84 ms Optical synchronization: 32 to 52 ms
Wired synchronization: 40 to 68 ms
OFF
to ON Optical synchronization: 160 to 360 ms
Wired synchronization: 200 to 420 ms Optical synchronization: 160 to 260 ms
Wired synchronization: 200 to 340 ms
×8 Slow
mode * ON to
OFF Optical synchronization: 64 to 144 ms
Wired synchronization: 80 to 168 ms Optical synchronization: 64 to 104 ms
Wired synchronization: 80 to 136 ms
OFF
to ON Optical synchronization: 320 to 720 ms
Wired synchronization: 400 to 840 ms Optical synchronization: 320 to 520 ms
Wired synchronization: 400 to 680 ms
* Selectable by SD Manager 3.
Effective aperture angle (EAA)
(IEC 61496-2) ±2.5° or less at operating range of 3 m or greater for emitter and receiver
Light source Infrared LEDs, Wavelength: 870 nm
Startup waiting time 3 s max.
Electrical Power supply voltage (Vs) SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Current consumption
See 1-6. List of Models for more information.
Safety outputs (OSSD) Two PNP or NPN transistor outputs (PNP or NPN is selectable by wiring of power
supply.)
Load current: 300 mA max., Residual voltage: 2 V max. (except for voltage drop due to
cable extension), Capacitive load: 1 µF max., Inductive load: 2.2 H max. *1 *2
Leakage current: 1 mA max.(PNP), 2 mA max.(NPN) *3
*1. The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
*2. The load inductance is the maximum value when the safety output frequently
repeats ON and OFF.
When you use the safety output at 4 Hz or less, the usable load inductance
becomes larger.
*3. These values must be taken into consideration when connecting elements including
a capacitive load such as a capacitor.
Auxiliary output One PNP or NPN transistor output (PNP or NPN is selectable by wiring of power
supply.)
Load current: 100 mA max., Residual voltage: 2 V max. *
* The residual voltage is 3 V max. when the Intelligent Tap is connected to the sensor.
Output
operation
mode Safety output Light-ON (Safety outputs are turned to the ON state when the receiver receives an
emitting signal.)
Auxiliary
output Safety output (Inverted signal output: Enable) (default) (Configurable by SD Manager 3)