Omron F3SG-PG Series, User Manual, Page: 216 / 473

186
Ch
apt
e
r
3
In
te
lligent
Tap Applicat
ion Examp
le
F3SG-SR/PG
User’s Manual
Setting with Intelligent Tap

To finish the maintenance task and start normal operation of the facility,
perform the followings.
1.
Use a Phillips screwdriver to attach the cover of the intelligent tap.
(Recommended tightening torque: 0.35N

m)
2.
If a cable is not attached to CN3, use the torque wrench XY2F-0004 to attach the accessory
waterproof cover (for plug).
(Recommended tightening torque for waterproof cover (for plug): 0.39 to 0.49N

m)
3.
If a cable is not attached to CN4, attach the accessory waterproof cover (for socket).
3-10-2.
Saving Sensor Setting to Intelligent Tap Using Backup
Function
You can use the backup function to save to the intelligent tap the same settings as setup information
stored in F3SG-SR/PG. To apply the saved setting to another F3SG-SR/PG, refer to 3-10-3. Applying
Setting Saved in Intelligent Tap to Sensor Using Restoration .

Work steps
1.
If power of the intelligent tap or F3SG-SR/PG is ON, turn it OFF.
2.
Use a Phillips screwdriver to remove the cover of the intelligent tap.
3.
Set the DIP-SW channels 1 to 8 OFF.
DIP-SW
1 2 3 4 5 6 7 8
O N
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector