Omron F3SG-PG Series, User Manual, Page: 218 / 473

188
Ch
apt
e
r
3
In
te
lligent
Tap Applicat
ion Examp
le
F3SG-SR/PG
User’s Manual
Setting with Intelligent Tap

To finish the maintenance task and start normal operation of the facility,
perform the followings.
1.
To finish the maintenance task and start normal operation of the facility, perform the followings.
(Recommended tightening torque: 0.35N

m)
2.
If a cable is not attached to CN3, use the torque wrench XY2F-0004 to attach the accessory
waterproof cover (for plug).
(Recommended tightening torque for waterproof cover (for plug): 0.39 to 0.49N

m)
3.
If a cable is not attached to CN4, attach the accessory waterproof cover (for socket).
3-10-3.
Applying Setting Saved in Intelligent Tap to Sensor Using
Restoration
Before performing this step, use the setup information stored in the intelligent tap using the backup
function and SD Manager 3 to change the F3SG-SR/PG settings. For how to save the setup information
using the backup function, refer to 3-10-2. Saving Sensor Setting to Intelligent Tap Using Backup
Function . For how to save the settings to the intelligent tap using SD Manager 3, refer to 3-8. (1) To edit
backup/restoration data in the Intelligent Tap and 4-3. Changing Settings with SD Manager 3 .

Work steps
1.
If power of the intelligent tap or F3SG-SR/PG is ON, turn it OFF.
2.
Use a Phillips screwdriver to remove the cover of the intelligent tap.