Omron F3SG-PG Series, User Manual, Page: 219 / 473

189
F3SG-SR/PG
User’s Manual
Ch
apt
e
r
3
In
te
lligent
Tap Applicat
ion Examp
le
Setting with Intelligent Tap
E
3.
Set the DIP-SW channel 1 ON and channel 2 OFF.
4.
Set the DIP-SW channels 3 to 8 OFF.
5.
If the intelligent tap is not connected yet, connect it to F3SG-SR/PG. Refer to the chart in 3-10-1.
Setting F3SG-SR/PG with DIP Switch ,

Step 5. to make sure that the system has the configuration
with intelligent tap.
6.
Turn on power of the intelligent tap and F3SG-SR/PG.
7.
Check the indicators on the intelligent tap if restoration is complete.
If restoration is not complete, the indicators are as shown below.
DIP-SW
1 2 3 4 5 6 7 8
O
N
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector
DIP-SW
1 2 3 4 5 6 7 8
O N
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector
<Status of indicators at normal end>
OUT :Flashing green at 0.5 second cycle
(quick flashing)
ERR :Not lit