Omron F3SG-PG Series, User Manual, Page: 224 / 473

194
Ch
apt
e
r
3
In
te
lligent
Tap Applicat
ion Examp
le
F3SG-SR/PG
User’s Manual
Setting with Intelligent Tap
4.
Set the DIP-SW channels 1 to 8 OFF of the new intelligent tap to attach.
5.
Refer to the chart in 3-10-1. Setting F3SG-SR/PG with DIP Switch ,

Step 5. to connect the new
intelligent tap to F3SG-SR/PG (configuration shown below).
6.
Press and hold the Push-SW of the attached intelligent tap for 1 second or longer.
The setting of F3SG-SR/PG are backed up in the intelligent tap.
7.
Check the indicators if backup is complete.
If the indicators are different from the above, turn off power of the intelligent tap and F3SG-SR/PG,
make sure that the wiring is proper, and go back to step 4. to perform the steps again.
8.
Turn off power of F3SG-SR/PG.
9.
Set the DIP-SW channel 1 ON.
DIP-SW
1 2 3 4 5 6 7 8
O
N
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector
<Status of indicators at normal end>
IN :Flashing yellow at 0.5 second cycle
(quick flashing)
ERR :Not lit
DIP-SW
1 2 3 4 5 6 7 8
O
N
Push-SW
DIP-SW
Bluetooth
®
Communication Unit
Connector
USB Type-C TM
Connector