Omron F3SG-PG Series, User Manual, Page: 234 / 473

204
Chapter
4
O
ver
vi
ew
a
nd
Spec
if
ic
at
io
ns
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
If the emitter is not connected with the Intelligent Tap like patterns (5), (6) above, there are the following
restrictions.
• As synchronization method, only the optical synchronization is usable.
• It is unable to configure the following function using the DIP Switch on the Intelligent Tap.
Operating range selection
• It is unable to configure the following functions using SD Manager 3.
External test, operating range selection, lamp, area beam indicator (ABI), and vibration detection
• It is unable to monitor the emitter using the configuration tools.
• The backup and restoration functions of the emitter are not usable.
• The information of the emitter cannot be obtained via IO-Link.
If connecting the emitter/receiver with the Intelligent Tap as shown by illustration (7) - (9) above, setting
change of the emitter/receiver, IO-Link communications, and backup/restoration can be performed.
Only the Wiring Synchronization is usable as synchronization method.
Before connecting with each device, confirm that the power of the F3SG-SR/PG and Intelligent Tap is
OFF. After connection is completed, turn ON the power and start up the F3SG-SR/PG and Intelligent
Tap.