Omron F3SG-PG Series, User Manual, Page: 266 / 473

236
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
F3SG-SR/PG
User’s Manual
Setting with SD Manager 3
4-3-3. Auxiliary Output/Lamp Setting
4-3-3-1. Auxiliary Output/Lamp
First, carry out 4-3-1. Preparing to Change Settings .
Next, click the icon below on the Top page.
The setting screen below is displayed.
*1 For this function, setting parameters are kept individually in each case that the muting function is set enabled or disabled.
When changing of the muting state from enabled to disabled or vice versa, confirm the setting of this function again.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C

F3SG-SRB

F3SG-PGA-L

No. Function name Description
Initial value
Configurable value or
numerical range
Muting enabled *2
Muting
enabled *1
Muting
disabled *2
1 Output operation
mode of auxiliary
output/lamp Select the information or signal output by the
auxiliary output. Safety
output
information Safety
output
information
 Information (Output
operation mode)
assigned to Auxiliary
output/Lamp
2 Inverted signal
output of auxiliary
output/lamp Select Enable or Disable for inverted signal of
the auxiliary output. Enable Enable Enable/Disable
3 Output pattern of
auxiliary output/
lamp Select a desired output pattern of the auxiliary
output. Solid-ON Solid-ON Solid-ON/ON 1
time*2/ON 2 times*3/
ON 3 times*3
4 Zone setting Opens a zone setting screen for the
Designated Beam Output function.
The [Zone setting] button is only active
when the [Designated beam output
information] option is selected for the
[Output operation mode].
For more information on settings, refer to
4-3-3-2. Designated Beam Output .